Posted by Administrator on 2/12/2014
Check out the security camera footage from the Corvette Museum showing the eight Corvettes getting swallowed by the sinkhole! You might want to sit down for this one...
According to museum reps. the Sinkhole was about 40 feet wide and 20 feet deep. Of the eight Corvettes claimed by the sinkhole, several were priceless or close to it, including the one millionth Corvette produced and the 1.5 millionth Corvette produced.
Posted by Administrator on 12/16/2013
Clutch Masters LS2-LS7 Corvette / Camaro Clutch Kits and Flywheel Clutch Masters is proud to introduce the new Clutch Masters clutch FX- Series line for the 2005-
2012 Chevrolet LS2, LS3, and LS7.
Clutch Masters offers FX- series clutch kits that are built to
work with the factory OEM flywheel or a clutch kit to work with an aftermarket single mass
flywheel such as the Clutch Masters Steel Flywheel.
Posted by Administrator on 11/5/2013
VIBRANT! One of the most requested brands by our customers is now here! That's
right, Top Speed Labs carries most Vibrant Performance fabrication
products in the warehouse!  If you are looking to
improve the performance of your vehicle, whether it be a Race Car, a Hot Rod, a Muscle Car, a Sport
Compact, a Truck or even a Motorcycle, Vibrant and Top Speed Labs have the components and full assemblies that you want
and need to finish the job. Vibrant Intercooler piping, Vibrant Silicone Couplers, Vibrant Turbo T-Bolt Clamps, Vibrant Exhaust Piping, Vibrant Intercooler Cores, Vibrant Exhaust Clamps, and MUCH MORE! CLICK HERE TO Email us today and we can get it out the door and on the way to you!
Posted by Administrator on 10/2/2013
Ford Focus ST 3" Exhaust from MBRP with FREE SHIPPING from TOP SPEED LABS!!CLICK HERE TO CHECK IT OUT Top Speed Labs is happy to announce that MBRP now offers 3" catback
exhaust systems for the 2013-2014 Ford Focus ST with the 2.0L Ecoboost
engine. 3" piping was selected to reduce back-pressure while increasing
horsepower and torque.
Dyno results show a gain of 18 horsepower and 16 Ft-lb of torque over
the factory exhaust system! CLICK HERE TO CHECK IT OUT
Posted by Administrator on 8/30/2013
2013 RAM Cummins AFE Intake System The aFe Stage 2 cold air intake is a highly engineered powder-coated heat-shielded air box with a
one-piece intake tube. Handling filtration duties is the PRO DRY S performance air filter that
features 3-layers of synthetic "oil-free" media. The PRO DRY S filter is constructed with 100%
polyurethane for long life and multiple cleaning cycles.
Posted by Administrator on 8/13/2013
Hide The Plate - The New License Plate Mounting Option:   As you may have noticed, The Manual Hide The Plate and The Motorized Hide The Plate are two of our best selling products and for good reason! Who wants to drill into their nice clean front bumper to mount a license plate? Did you know many of today's vehicles don't even come with an option to mount a front license plate?! Click here to find out more about the Hide The Plate License Plate Mounts.
Posted by Administrator on 8/13/2013
 The Diablosport inTune is the most affordable touchscreen-equipped tuning device
on the market today and ONE PART NUMBER (I-1000) fits just about EVERY American Car and Truck on the market! It delivers an enhanced user experience with easy
to understand menus, automatic USB updates via the internet, and a host
of vehicle specific features at an incredibly affordable price. It's
like no other flash tuning device available, offering all of the
functions users want, and fits in your pocket. CLICK HERE FOR MORE!
Posted by Administrator on 5/29/2013
After 3 years of rigorous research and development, GrimmSpeed has announced the release of their
Top Mount Intercooler. GrimmSpeed has engineered an excellent balance of heat transfer, flow,
fitment and quality and with an available y-pipe upgrade and five splitter options for the 02-07
WRX
and all STI fitments.
Posted by Administrator on 5/29/2013
The aFe Stage 2 cold air intake produces up to 36HP and up to 63 lbs. x ft. torque while
outflowing the factory intake by up to 33%. This intake has a highly engineered, powder-coated
heat-shielded air box with a two-piece intake tube.
Posted by Administrator on 5/22/2013
Edelbrock E-Force Supercharger Street Legal Kit For 2005-10 Chrysler Hemi® Does your HEMI equipped Challenger, Charger, Magnum
or 300 need more power? Then get an Edelbrock E-Force Supercharger
system - the most efficient supercharger on the market for the popular
Chrysler 5.7L and 6.1L HEMI engines. These complete supercharger systems
provide maximum flow, minimum temperature rise, quiet operation and
reliability only the Edelbrock name can guarantee. They feature minimum
air restriction in and out of the supercharger for optimal flow. They
also include individual 7" long intake runners that allow for maximum
low end torque and great drivability. These systems are available with
an optional supplemental warranty, 3 years or 36,000 miles and 5 years
or 60,000 miles to give you peace of mind when installing our
supercharger system on your brand new vehicle. CALL or Email US TODAY FOR MORE INFO! [email protected] or 860-333-1735
Posted by Administrator on 5/14/2013
Posted by Administrator on 5/14/2013
Top Speed Labs is PROUD to offer Luverne Truck Equipment! Luverne Truck Equipment has been
designing and manufacturing high-quality truck accessories in the
Heartland of America since 1963. Top Speed Lab's and Luverne’s product line offer a broad
base of upscale aftermarket accessories for pickups, vans, SUVs, and
medium and heavy-duty trucks. CLICK HERE for more info on LuverneTop Speed Labs offers Nerf Bars, Side Steps, Truck tool Boxes, Ladder Racks, Brush Guards, Bull Bars, and more! Top Speed Labs supplies Groton, New London, Waterford, Mystic, and all of South Eastern Connecticut with Truck Accessories!! Top Speed Labs and are the names to trust and the
companies to rely on. You deserve the best!
Posted by Administrator on 5/7/2013
New GReddy Blow-Off Valve FV (Limited Colors)  Top Speed Labs and GReddy are proud to introduce a new generation of
"Push Type Blow Off Valve," the GReddy BOV FV. The "FV" stand for
Floating Valve, and it is this breakthrough in design that produces
quicker valve response, increased valve travel, and improved resistance
to premature valve lift and boost leak.
Posted by Administrator on 5/6/2013
Top Speed Labs is now stocking almost all Flowmaster Exhaust Systems in our warehouse!
We will not be undersold on Flowmaster Exhausts! American Thunder and the rest of the Flowmaster Line up are at TOP SPEED LABS! We are working on getting them all on the site ASAP but until then EMAIL us or call us and we will give you a smoking deal!
Posted by Administrator on 4/28/2013
GTSPEC has announced the release of their latest additions to their FR-S & BRZ suspension
offerings. 
Posted by Administrator on 4/25/2013
Greddy has released two new Evo 3 exhaust systems for the 02-07 Subaru STI 2011 + STI Sedan with
80 MM diameter piping.
Posted by Administrator on 4/23/2013
Top Speed Labs is stocking most Comp Clutch kits for ALL Subaru!!  Competition Clutch (CCI) is the fastest growing performance clutch
company in North America. CCI contributes this growth to its commitment
in the innovation and quality of the products that we manufacture and
supply, complimented by a sincere desire to provide unparalleled
customer service and delivery.
Posted by Administrator on 4/19/2013
 Introducing the all new Superchips Redline (SCR) in-cabin tuner. SCR was designed specifically
with the sport compact and muscle car enthusiast in mind. SCR comes fully loaded with the highest
horsepower tunes available on the market for the 2013 Ford Focus ST as well as Superchips' superb
catalog of performance driven tunes for 2005-13 Mustangs. SCR provides the horsepower and torque
you crave combined with hundreds of combinations of data points to monitor,performance tests, and
the ability to read and clear trouble codes.
Posted by Administrator on 4/17/2013
 COBB Tuning has a Stainless Steel Catless Uppipe Kit for Subaru. The COBB Tuning
Catless Uppipe is constructed of rugged, 14-gauge, 2-inch diameter polished stainless steel
tubing to endure the intense exhaust gas temperatures these turbocharged engines put out. These
Catless Uppipes are CNC mandrel bent, ensuring precise and consistent fitment, eliminating the
need for a weak flexjoint section.
Posted by Administrator on 4/15/2013
 Magnaflow Performance has released their AL Aluminized Diesel Series Exhaust. The Aluminized
Diesel
Series systems are offered in the PRO Series and the CUSTOM BUILDER Pipe Kit. Magnaflow
manufactures
all of their own products, guaranteeing the same quality and service you are familiar with.
Posted by Administrator on 4/12/2013
aFe power announces the release of a new BladeRunner 3.5" Intake Manifold for 2003-2007 Dodge RAM
2500/3500 L6-5.9L Cummins.
The BladeRunner intake manifold represents the next generation in intake manifold design. The
intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through
the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary
internal bolt design to help increase the flow and provide a solid seal void of leaks or
deformities. The BladeRunner comes with up to 5 ports for nitrous injection, gauges and other
accessories used by hardcore enthusiasts.
Posted by Administrator on 4/10/2013
New from Injen Technology is their Short Ram Intake with MR Technology for the 2012 Golf MK6 2.5L
5 Cyl. SRI w/MR Tech and Heat Shield 
Posted by Administrator on 4/9/2013
 Top Speed Labs supplies Trailer Hitches to all of Connecticut. Whether
you live in Groton, Mystic, New London, Ledyard, Hartford, Stonington,
or even Rhode Island. Top Speed Labs carries all of your towing
accessories, hitch wiring, and trailer hitches! ValleyTow, Hidden
Hitch, Reese Hitches, Tow Ready, Draw Tite, Curt Hitches and more! All 1
day away! We can even ship them direct to your door! Call or email Top Speed Labs today and let us help you start towing! 860-333-1735 or [email protected]
Posted by Administrator on 4/9/2013
 MBRP's New Driver & Passenger Intercooler Pipe Kits for the 05-07 and 03-07 Ford 6.0 Powerstroke
feature the following:
3" Driver Side Intercooler Pipe PN IC1975
.Show Quality Polished 6061 Aluminum
.High Flowing Intake Elbow with Two 1/8" NPT Ports
.Increased Performance, Faster Turbo Spool and Lower EGT's
.Improved 4-ply Heavy Duty Couplings
.Spring Loaded Constant-Tension Clamps Prevents Leaks and "Blown Boots"
.Mandrel Bent 3" Tubing for 45% Increased Flow
3" Passenger Side Intercooler Pipe PN IC1974
.Show Quality Polished 6061 Aluminum
.Increased Performance, Faster Turbo Spool and Lower EGT's
.Improved 4-ply Heavy Duty Couplings
.Spring Loaded Constant-Tension Clamps Prevents Leaks and "Blown Boots"
.Mandrel Bent 3" Tubing for a 44% Increase in Flow
.Part #: IC1975
.Part #: IC1974
Posted by Administrator on 4/7/2013
K&N has decided to squeeze more horsepower out of the already potent LSA motor by replacing the
restrictive stock intake system with a high performance, free flowing air intake system.
K&N's part number 63-3079 is made almost completely out of light weight super strong carbon fiber.
The K&N Carbon Fiber Air Intake System for 2012 and 2013 Chevy Camaro ZL1 was tested by K&N and
showed an incredible gain of an estimated 31.7 horsepower at 4300 RPM and 39.7 lb-ft of torque at
3300 RPM!
|
|
Video of the Corvettes swallowed by a sinkhole at the Corvette Museum in Kentucky
Clutch Masters LS2-LS7 Corvette / Camaro Clutch Kits and Flywheel
Vibrant Fabrication Parts at Top Speed Labs!
Ford Focus ST 3" Exhaust from MBRP with FREE SHIPPING!
2013 RAM Cummins AFE Intake System
Hide The Plate Comparison
Diablosport InTune
GrimmSpeed Subaru Top Mount Intercooler
GM Diesel Trucks 13+ V8-6.6L aFe MagnumFORCE Intake Stage-2 PRO 5R
Edelbrock E-Force Supercharger Chrysler HEMI Street Legal Kits
February 2014
December 2013
November 2013
October 2013
August 2013
May 2013
April 2013
March 2013
January 2013
|